Stretching and warm-up: what really works before training

Static stretching before training – yes or no? What studies say about warming up, stretching and foam rolling, how strength and conditioning coaches build a warm-up, and what really protects against injury.

Erika Ivanová
Erika IvanováCertified personal trainer · Updated October 2026 · 6 min read
In short
  • A good warm-up improves performance. Before training, dynamic stretching is what matters. If you also stretch statically, hold each muscle for 30 to 45 seconds at most – longer stretching can reduce performance.
  • Strength training through a full range of motion improves range of motion as much as stretching – it’s “two in one”.
  • What protects against injury is mainly strength training and a well-planned warm-up, not stretching on its own.

Why warm up

A review of 32 high-quality studies found that warming up improved performance in 79% of the measures studied and almost never did harm (Fradkin et al., 2010). There are three reasons:

  • Muscle temperature. A warmer muscle contracts faster and more forcefully, and nerves conduct signals faster.
  • Priming. Short, intense muscle contractions temporarily “switch on” the neuromuscular system, so the strength and power that follow are higher (Opplert & Babault, 2018).
  • Movement rehearsal. Warm-up sets are also technique practice – the client dials in the movement before the heavy weight.

Static stretching before training: keep it short

  • Up to 30 to 45 seconds per muscle doesn’t significantly reduce performance. From 60 seconds per muscle group, performance drops by 4.6% on average (Kay & Blazevich, 2012; Behm et al., 2016).
  • It’s not enough as the only warm-up – static stretching before exercise reduced strength by 5.4% on average, least with stretches of up to 45 seconds (Simic et al., 2013).

Why: long stretching temporarily weakens muscle activation and reduces tendon stiffness, so the muscle transmits force less efficiently.

Stretching during exercise: strength through a full range

A muscle also stretches during full-range exercise – in a deep squat, a lunge or a Romanian deadlift.

  • Strength training improves range as much as stretching. A review of 55 studies: strength training with load improved range of motion similarly to stretching, and combining the two brought no more than stretching alone. Bodyweight-only training didn’t significantly improve range (Alizadeh et al., 2023). A review of 11 controlled trials came to the same conclusion (Afonso et al., 2021).
  • Lowering the weight slowly helps most. Eccentric training improved lower-limb flexibility in all six studies. Muscle fibres are thought to lengthen (O’Sullivan et al., 2012).

If you want to save time: loaded exercises through a full range, lowering the weight over 2 to 3 seconds, are “two in one” – for everyday flexibility, extra long stretching isn’t necessary (Alizadeh et al., 2023). Separate stretching makes sense where a client lacks a specific range.

Dynamic stretching: the better choice before training

Controlled movements through a full range – lunges with a twist, leg swings, arm circles. They increase range of motion and at the same time improve strength, power, sprinting and jumping, by 1.3% on average (Opplert & Babault, 2018; Behm et al., 2016). Fast ballistic movements are less suitable than controlled ones.

Why: during dynamic stretching the muscle works, so it warms up and gets primed, while its stiffness drops slightly. It gets what it needs to perform, not just a stretch.

How strength and conditioning coaches warm up

Strength and conditioning coaches often use the RAMP framework – 10 to 15 minutes in total:

  • Raise – warming up (3–5 min) – bike, rower, jump rope or light full-body exercises. Goal: raise heart rate and muscle temperature.
  • Activate – activation – muscles that will matter in the session and are often “asleep”: glutes (bridges, band walks), shoulder blades (band pull-aparts), core.
  • Mobilize – mobility – dynamic stretching in movements similar to the main session. Static only briefly and only where the client lacks range.
  • Potentiate – priming – 2 to 4 warm-up sets of the main exercise with rising weight and falling reps, or a few jumps.

Set the weights for warm-up sets with the 1RM calculator.

What really protects against injury

  • Stretching alone isn’t enough. A review of 25 studies with 26,610 people found no protective effect from stretching. Strength training cut injuries to less than a third (Lauersen et al., 2014).
  • A well-planned warm-up is. Young female footballers doing the FIFA 11+ warm-up had a 32% lower risk of injury and a 45% lower risk of severe injury (Soligard et al., 2008).

Foam rolling and static stretching after training

Foam rolling before training slightly improved sprinting (+0.7%) and flexibility (+4%), with a negligible effect on strength and jumping. After training it reduces perceived muscle soreness. The effects are small, but as part of a warm-up it makes sense (Wiewelhove et al., 2019).

Static stretching has its place after training or as a separate block when a client wants to increase a specific range. What’s interesting is why it works: after a single stretch and after 3 to 8 weeks of regular stretching, range increases mainly because the nervous system tolerates the stretch better – not because the muscle permanently lengthens (Weppler & Magnusson, 2010). The extra range right after stretching usually lasts less than 30 minutes (Behm et al., 2016).

Sessions and client notes in one placeTrainzeno keeps each client’s sessions and notes together – free, on your phone.
Download the app →

For trainers

  • Match the warm-up to the session. Hips and ankles before squats, shoulders and shoulder blades before presses.
  • Keep it short and effective. 10 to 15 minutes is enough. The client should reach the first working set warm, not tired.
  • Use it as a check-in. You see how the client moves, whether anything hurts and what kind of day they’re having – and adjust the session.

FAQ

Can I stretch statically before training?

Yes, briefly – up to 30 to 45 seconds per muscle – followed by the dynamic part. Long stretching belongs at the end of the session.

How long should a warm-up last?

Usually 10 to 15 minutes. Before heavy strength training or with an older client it can be longer, before a light session shorter.

Is warming up on the treadmill enough?

Raising temperature is only the first step. Without activation, mobility and warm-up sets of the main exercise, the body isn’t fully ready.

Sources: Fradkin et al., J Strength Cond Res 2010; Opplert & Babault, Sports Med 2018; Kay & Blazevich, Med Sci Sports Exerc 2012; Behm et al., Appl Physiol Nutr Metab 2016; Simic et al., Scand J Med Sci Sports 2013; Alizadeh et al., Sports Med 2023; Afonso et al., Healthcare 2021; O’Sullivan et al., Br J Sports Med 2012; Lauersen et al., Br J Sports Med 2014; Soligard et al., BMJ 2008; Wiewelhove et al., Front Physiol 2019; Weppler & Magnusson, Phys Ther 2010.

Further reading

Notebook, Excel, WhatsApp? All in one app.

Trainzeno counts session packages, attendance and payments for you – free for personal trainers and class instructors.

Download on the App StoreGet it on Google Play